Kamis, 25 Agustus 2016

Automatic Water Float (Float Switch Floating/Control)


Automatic Water float (Float Switch/Floating Control)/Water Level Controller Tool (Liquid Level Control Switch) is used for the Toren/Tendons/Shelter water, etc. York is a brand that is widely used in Indonesia.
Automatic Water float (Float Switch/Floating Control)/Water Level Controller Tool (Liquid Level Control Switch) is used for the Toren/Tendons/Shelter water, etc. York is a brand that is widely used in Indonesia.

This tool has a cable length varies from each manufacturer, from two meters to five meters.

Level switch or float switch, a discrete switch is used to control the level of the surface of the liquid in the tank. Position the level of liquid in the tank is used to trigger changes to the contact switch. Position the switch level there are horizontal and some vertical.

Automatic Water float (Float Switch/Floating Control)/Water Level Controller Tool (Liquid Level Control Switch) is used for the Toren/Tendons/Shelter water, etc. York is a brand that is widely used in Indonesia. Floating control is widely used to replace other types of automatic water buoy that was not durable (no longer used) because the power pump that is too large.

Floating connection control system uses a metal ball and plate like the default automatic pump dye, so it can withstand a great power or can pass large currents making it more durable than other types of water buoy.


Working principles

Float Switch position of the dead
Float switch off/off
In horizontal position, when the surface of the liquid down, buoy will also come down, so that the contacts will change from his position. If the surface of the liquid rises again, then a float will ascend and contacts will be changed again. In vertical position, in the buoy contained magnets stick, which moves up and down to follow the surface of the liquid height. In the middle section of the pipe there is a float switch that open and close it by moving the piston remains in the magnet follows a float. FS two configurations available, namely open tanks and closed tanks. Open tank tank used to open so publicly against atmospheric pressure. While the closed tank used for the closed and pressurized tanks.

Mostly, this tool is used for only one function, namely, turn on the machine the water when the water in the tank/toren is up. And turn off the water if the water machine back in the shelter already full tank.

Float Switch position lights up
Float switch on/on
Nevertheless the Float Switch can be used in conditions otherwise IE: turn on the machine the water when the water in the Center are siphoned off is still available. And turn off the water if the water machine back in the Center are siphoned off out. Installation of Float Switch as this is usually on the well, the place where we suck up water. This is to keep the water pump in order not to light up when the condition of the well water, vacuum or experiencing a drought.

To set up a water pump can automatically on and off on the level of the water surface is desired in a way interesting or stalling wiring associated ballast point orange containing sand.

Tidak ada komentar:

Poskan Komentar